Installing center console fully with center armrest
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Lift rear center console (2), guide it forwards and connect all the connectors.
- Insert the wiring harness into the center console (2).
- Tighten the screws (1).TIGHTENING TORQUE SPECIFICATIONS
Screw connection for center console Oval-head screw Tightening torque 1.8 Nm - Tighten the screws (1).TIGHTENING TORQUE SPECIFICATIONS
Screw connection for center console Oval-head screw Tightening torque 1.8 Nm Installing the center armrest
- Install the center armrest and tighten nuts (1).TIGHTENING TORQUE SPECIFICATIONS
Center armrest to support Nut M8 Tightening torque 21.4 Nm
Follow-up work
- Refer to INSTALLING THE FRONT STORAGE COMPARTMENT .
- Refer to INSTALLING THE CENTER CONSOLE TRIM .
- Refer to INSTALLING THE DECORATIVE TRIM TO THE CENTER CONSOLE .
- Refer to INSTALLING THE GEARSHIFT LEVER COVER .
- Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
- Refer to INSTALLING SIDE TRIM PANEL FOR THE LEFT AND RIGHT CENTER CONSOLE .
- Refer to INSTALLING THE BOTTOM RIGHT INSTRUMENT PANEL TRIM .