Installing the gearshift lever cover

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Place the gearshift lever knob on gearshift lever and align by lightly pressing in the direction of travel.
The anti-twist lock must bite.
Press the gearshift lever knob with the palm of the hand until it can be felt to engage.
When installing, the tie rod of the gearshift lever must not be bent.

Courtesy of BMW OF NORTH AMERICA, INC.
Clip in gaiter (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.