Removing the rear wheel arch cover
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Feed in wheel arch cover (1) and correctly position it.
- Tighten all bolts and nuts (arrows).TIGHTENING TORQUE SPECIFICATIONS
Wheel arch cover to body Plastic nut Tightening torque 2.6 Nm Screw Tightening torque 2.6 Nm
Follow-up work
- Refer to INSTALLING THE REAR WHEEL ARCH TRIM .
- Refer to MOUNTING THE WHEEL .