Adhesion of brake pads to brake pistons

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
After the brake pads have been installed they must immediately be bonded to the brake pistons:
Step on the brake pedal to the floor and hold the pressure for one minute. This causes the brake pads to adhere to the brake pistons.

Follow-up work

Refer to INSTALLING FRONT BRAKE PAD WEAR SENSOR (FIXED CALIPER BRAKE) .
Refer to PARTIALLY INSTALLING THE FRONT WHEEL ARCH COVER .
Refer to INSTALLING THE FRONT LEFT AND RIGHT WHEELS .
Refer to COMMISSIONING OR BEDDING IN (BRAKE) OF NEW BRAKE PADS AND DISCS (HIGH BRAKE) .