Installing the rear outside door handle support

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Feed in the outside door handle support (2) into the door.
Insert the outside door handle support (2) into the fixture toward the rear.
Attach vehicle wiring harness to the outside door handle support (2) .

Tighten down screw (1) .

TIGHTENING TORQUE SPECIFICATIONS

Outside door handle support to door
screw	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.