Removing and installing both deflecting elements for the drive belt (S55 Engine) (2019-2022)

Necessary preliminary work: 

• Remove DRIVE BELT FOR ALTERNATOR .

Deflecting element with holder at the lower section of the crankcase 

Release screws (1).

Tightening torque: 11 28 4AZ .

Remove the deflecting element with holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Deflecting element to air conditioning compressor holder 

Use a suitable tool to release the protective cap (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Deflecting element to air conditioning compressor holder 

Release screw (1).

Tightening torque: 11 28 5AZ .

Remove deflecting element (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.