11 28 V Belt With Belt TENSIONER And Idler Pulley
N55 ENGINE (2016-2018):
11 28 V-RIBBED BELT WITH TENSION AND DEFLECTION ELEMENT - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Standard belt drive | ||||
| 1AZ Belt tensioner with deflection pulley to engine block. | N55 | M10x90 | 38 Nm | |
| AZ Belt tensioner with deflection pulley to engine block. | N55 | M10 x 103 | 38 Nm | |
| 2AZ Deflection pulley 65 x 32 | N55 | M10x55 | 60 Nm | |
| 3AZ Deflection pulley 75 x 32 | N55 | M10x55 | 60 Nm | |
| 4AZ Holder for deflecting element to oil sump | N55 | M10x37 | 38 Nm | |
| 5AZ Holder for deflecting element to oil sump | N55 | M10x30 | 38 Nm | |
| 6AZ Deflecting element 75 | N55 | M10x55 | 56 Nm | |
| 7AZ Deflecting element 90 | N55 | M10x55 | 56 Nm | |
| SGR belt (start alternator belt) | ||||
| 8AZ Belt tensioner to crankcase (operating tensioner) | N55 | M10x90 | 38 Nm | |
| 9AZ Belt tensioner to crankcase (start tensioner) | N55 | M10x55 | 38 Nm | |
| 10AZ Deflecting element 75 | N55 | M10x55 | 56 Nm | |
| 11AZ Holder for deflecting element to oil sump | N55 | M10x37 | ASA screw (exterior star handle) | 38 Nm |
| 12AZ Holder for deflecting element to oil sump | N55 | M10x30 | ISA countersunk screw (interior star handle) | 38 Nm |
S55 ENGINE (2019-2022):
11 28 V-RIBBED BELT WITH TENSION AND DEFLECTION ELEMENT - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| Standard belt drive | ||||
| 1AZ Belt tensioner with deflection pulley to engine block. | S55 | M10x90 | 38 Nm | |
| 2AZ Deflecting element 65x32 | S55 | M10x55 | 60 Nm | |
| 3AZ Deflecting element 75x32 | S55 | M10x55 | 60 Nm | |
| 4AZ Holder for deflecting element to lower section of crankcase (bedplate) | S55 | M10x30 | 38 Nm | |
| 5AZ Deflecting element to air conditioning compressor holder | S55 | M10x55 | 60 Nm | |
| 6AZ Belt wheel to coolant pump | S55 | M6x12 | 8 Nm |