Replacing control unit for left xenon headlight (2016-2022)

WARNING: Version with xenon lighting system: Danger to life due to high voltage! Disconnect all components from voltage supply before removal.

Work on the entire xenon lighting system (ignition device, control unit and bulb) may only be carried out by qualified personnel.

Comply with notes on handling EXTERIOR LIGHTS .

Necessary preliminary tasks:

Release screws (1).

Tightening torque 63 12 3AZ .

Remove control unit for xenon headlight (2) from headlight (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

When installing control unit for xenon headlight (1), make sure sealing cup (2) is correctly seated.

Courtesy of BMW OF NORTH AMERICA, INC.