Remove oil sump
Preliminary work
- Refer to LOWERING FRONT AXLE SUPPORT .
- Refer to REMOVING THE OIL FILLER CAP .
- Refer to RELEASING THE OIL DRAIN PLUG .
- Refer to REMOVING STARTER MOTOR .
NOTE:
RISK OF DAMAGE
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .
- Adhere to the utmost cleanliness.
- Protect components from contamination e.g. by covering.
- Close off line connections with seal plugs.
NOTE:
TECHNICAL INFORMATION
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
- Unlock plug connection (1) and disconnect.
- Unclip cable in the marked area.
- Loosen screws (2)
.
- Remove all screws (marks).
- Remove all screws (marks).
- Remove all screws (marks).
- Loosen screws (1)
and (2)
.NOTE: TECHNICAL INFORMATION
Increased force may be necessary during disassembly because the component is bonded with liquid sealing compound. - Loosen oil sump (1)
in the marked areas with the screwdrivers (2)
.NOTE: TECHNICAL INFORMATION
Increased force may be necessary during disassembly because the component is bonded with liquid sealing compound. - Loosen oil sump (1)
in the marked area with screwdriver (2)
.
- Remove oil sump (1)
from the bottom rear.