LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> 430i 2D Convertible >> Repair and Diagnosis >> General Information >> OEM General Information >> Maintenance And General Information - Repair (F32, F33 & F36) >> 00 00 Maintenance >> 00 00 252 BMW engine oil service without supplementary service (B58 6-Cyl. Engine) (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan) >> Removing the oil filler cap

Removing the oil filler cap

WARNING: Hot fluids  .
Risk of scalding! 
  • Conduct all work in the vehicle wearing appropriate personal protective equipment only.
WARNING: Hot surfaces  .
Risk of burning! 
  • Perform all work only on components that have cooled down.
NOTE: RISK OF DAMAGE 
Engine damage caused by excessively filling the engine with motor oil  .
Filling an excessive quantity of motor oil may cause engine damage  .
  • Observe the exact motor oil filling capacity.
  • Allow engine oil to drip off when draining. RISK OF DAMAGE 
NOTE: TECHNICAL INFORMATION 
Make sure the vehicle is operating temperature for engine oil service (engine oil temperature > 70°C).
NOTE: TECHNICAL INFORMATION 
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.

Preliminary work 

G12728097Courtesy of BMW OF NORTH AMERICA, INC.