Installing the electric coolant pump for the charge air cooler/air conditioning condenser

• Position electric coolant pump (2)  .
• Close the holder (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten nut (2)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Electric coolant pump to holder
  M6	tightening torque	8 Nm

• Connect connector (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  Make sure that the connections are locked correctly. The locks must engage audibly.
• Connect and lock the coolant hoses (1)  and (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING BOTH COOLANT EXPANSION TANKS .
• Refer to CONNECTING THE COOLANT HOSE TO THE RADIATOR OF THE LOW-TEMPERATURE COOLANT CIRCUIT .
• Refer to FILLING THE LOW-TEMPERATURE COOLANT CIRCUIT WITH THE VACUUM FILLER DEVICE .
• Refer to BLEEDING THE LOW-TEMPERATURE COOLING CIRCUIT .
• Refer to INSTALLING THE FRONT UNDERBODY PROTECTION .