Installing both coolant expansion tanks

Check the rubber mount (1) for correct fit.
Check that the holder (2) is fitted correctly.

Courtesy of BMW OF NORTH AMERICA, INC.
Check the rubber mount (1) for correct fit on the coolant expansion tank.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the coolant expansion tank (3) .
Connect the coolant line (2) to the coolant expansion tank (3) and lock it audibly.
Connect the connector (1) to the coolant level switch and lock it audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Guide the coolant expansion tank (2) into the latch mechanism (1) and engage it audibly.
Connect the coolant lines (arrows) to the coolant expansion tanks and lock them audibly.
NOTE: TECHNICAL INFORMATION
Follow notes for CARRYING OUT REPAIR WORK ON THE COOLING SYSTEM .

Courtesy of BMW OF NORTH AMERICA, INC.
Top up the coolant in both coolant expansion tanks to the maximum mark.
Close the sealing cap (1) until it lines up with the arrows.
Shut sealing cap (2) .

Courtesy of BMW OF NORTH AMERICA, INC.