Removing and installing (replacing) rear left or right lower section of side trim panel (4' Series Convertible)
Necessary preliminary tasks:
- Remove ARMREST SIDE SECTION .
- Remove SIDE TRIM UPPER SECTION .
- Remove REAR SEAT .
Release lower section of side trim panel (1) on clips (2).
Feed out lower section of side trim panel (1) from door sill cover strip (3).
Disconnect all associated plug connections/cable clips and remove lower section of side trim panel (1) inwards.
Installation note:
If necessary, replace clips (2).
Install all clips (2) with sealing ring.
When replacing side trim panel (3), remount the following parts according to the equipment:
- Speaker (4). Refer to REMOVING AND INSTALLING/REPLACING SPEAKER (TWEETER IN REAR SIDE TRIM PANEL) (4' SERIES COUPE/CONVERTIBLE) , or REMOVING AND INSTALLING/REPLACING REAR MID-RANGE SPEAKER (IN STORAGE SHELF) (4' SERIES COUPE/CONVERTIBLE)
- LED .
- ARMREST .
- MODULE FOR INTERIOR MOVEMENT DETECTOR .
- Release circlips (1) and remove sound insulation (2)