33 52 161 Replacing rear left or right support bearing for spring strut/shock absorber

Special tools required: 

• 2 355 965
• 2 355 966

Installation note: 

1. All screws, nuts, bolts and hose clamps removed during the repair must be replaced.
2. Retaining elements on chassis and suspension and steering parts must be replaced.

Necessary preliminary tasks: 

• Remove the SHOCK ABSORBER .

Remove protective cap (1) and sealing washer (2).

Installation note: 

Replace the faulty components.

Courtesy of BMW OF NORTH AMERICA, INC.

Use special tools 2 355 965 and 2 355 966 to undo the nut (1).

Tightening torque 33 52 2AZ .

Installation note: 

Replace nut.

Courtesy of BMW OF NORTH AMERICA, INC.

Impact screwdrivers are prohibited!

Risk of damage inside the shock absorber!