33 52 Shock Absorbers
3352 SHOCK ABSORBERS - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Instructions | Torque Specification | |
|---|---|---|---|---|
| 1AZ Nut and locknut/self-locking nut | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | Replace screw. | 28 Nm |
| 2AZ Support bearing on shock absorber | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M10 | Replace nut. | 38 Nm |
| 3AZ Shock absorber to camber arm | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | Replace screw and nut. | |
| Tighten down in NORMAL POSITION | ||||
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90° |