REP-TAT-P-3213-02-F30 Install the electromechanical steering gear

• Insert the electromechanical steering gear into the front axle support.
• Replace the screws (2) and nuts.

  Parts  : Bolts, nuts

• Tighten the bolts (2) and nuts.
  TIGHTENING TORQUES SPECIFICATION
  
  

  Electromechanical steering gear to front axle support
  M10 Replace screws and nuts.	56 Nm

• Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.