REP-TAT-P-1142-25 For replacement: Remounting the oil feed line
Remove oil feed line
- Loosen screw 1
.
- 2
Remove oil feed line.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
Install oil feed line
- Replace the O-rings 1
.
Parts:
O-rings
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Position oil feed line 2
on exhaust turbocharger.
- Tighten down screw 1
.
TIGHTENING TORQUES SPECIFICATION
| Oil feed line to exhaust turbocharger |
| M6 x 12 |
tightening torque |
8 Nm |
Courtesy of BMW OF NORTH AMERICA, INC.
|