REP-TAT-P-1153-01 Remove connecting bracket on the engine block

Unlock coolant hose (1) and detach.

Courtesy of BMW OF NORTH AMERICA, INC.
Unclip the wiring harness from the clamp (1) at the connecting bracket.
Loosen hose clamp (2) and detach the coolant hose.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock and disconnect connector (1).
Remove connecting brackets (2).

Courtesy of BMW OF NORTH AMERICA, INC.