11 37 020 Removing and installing/replacing servomotor for eccentric shaft: Notes
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
NOTE:
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER
- Refer to REMOVING THE ACOUSTIC COVER
- Refer to REMOVING THE THROTTLE BODY
Follow-up work
- Refer to INSTALLING THE THROTTLE BODY
- Refer to INSTALLING ACOUSTIC COVER
- Refer to INSTALLING ACOUSTIC COVER