25 11 250 Removing and installing/replacing vibration absorber

Necessary preliminary tasks: 

• Remove the SHIFT LEVER COVER .

Removal: 

Loosen screws (2).

Remove vibration absorber (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Install the vibration absorber (1).

Tighten down screws (2).

Tightening torque, refer to: 25 11 3AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install the SHIFT LEVER COVER .