REP-TAT-P-5133-02 Installing the power windows

• Guide the power window regulator (4) in and tighten the nuts (3).

  Tightening torques 

  Power window on door
  	9.5 N.m

• Secure the Bowden cable in the area (2) on cable clip.
• Connect connector (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove adhesive tape (2) from the door window glass (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Press door window glass (1) down into latch mechanism on the sliding block (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the SOUND INSULATION ON FRONT DOOR 
• Install the FRONT DOOR TRIM PANEL ON LEFT OR RIGHT 
• Install the SWITCH TRIM ON THE FRONT LEFT OR RIGHT FRONT DOOR TRIM PANEL 
• Fix the FRONT LEFT OR RIGHT DOOR HANDLE COVER 
• Initialize POWER WINDOW CHECK