51 41... Removing and installing/replacing switch cover on left or right front door trim panel

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Necessary preliminary tasks: 

• Remove the COVER ON DOOR HANDLE 

Use a suitable tool (1) to release latch mechanism (2) of switch cover (3) in direction of arrow.

Unclip switch cover (3) from door trim panel towards front/top.

Disconnect plug connection and remove switch cover (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Following parts must not be missing or damaged:

1. Catch
2. Retaining clips
3. Guides

Replacement: 

Remount the SWITCH FOR POWER WINDOW (4) .

Courtesy of BMW OF NORTH AMERICA, INC.