51 34 171 Replacing rear left or right door window
Necessary preliminary work:
- Remove the SOUND INSULATION IN REAR DOOR
- Remove the COVER FOR WINDOW GUIDE
- Remove the OUTER WINDOW CAVITY WEATHER STRIP
Move door window until stop (3) of power window regulator fixture can be activated via recess on guide rails of power window regulator.
IMPORTANT:
Unlock and disconnect plug connection (1) from power window motor (2) (pinch hazard).
Lever out stop (3) with screwdriver (4) in direction of arrow and push door window up.
Installation note:
The door window must be correctly clipped into stop (3).
Carry out function check on power window regulator and anti-trap mechanism.
If necessary, refer to: NORMALIZE power window regulator.
Installation note:
Following parts of window guide (3) must not be damaged or missing:
- Catch
- Bump stop
Remove door window glass (1) towards top.
Installation note:
The door window (1) does not require adjustment.
Make sure door window (1) is correctly fitted on window guides.