REP-TAT-P-3213-02-F30 Install the electromechanical steering gear

• Insert the electromechanical steering gear into the front axle support.
• Replace the screws (2) and nuts.

  Parts:  Bolts, nuts

• Tighten the bolts (2) and nuts.

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

Follow-up work 

• Secure the STEERING SHAFT ON THE ELECTROMECHANICAL STEERING GEAR 
• Install the LEFT AND RIGHT TRACK ROD END 
• Install the STEERING ASSEMBLY COVER
• Install the FRONT UNDERBODY PROTECTION
• Mount the FRONT LEFT AND RIGHT WHEEL
• Connect the BATTERY EARTH LEAD
• Install the RIGHT LUGGAGE COMPARTMENT TRIM PANEL
• Refer to ENCODE/PROGRAM CONTROL UNIT(S)