11 51 028 Removing and installing/replacing auxiliary coolant pump for exhaust turbocharger

Recycling 

Coolant emerges when coolant lines are detached. Have a suitable collecting vessel ready.

Catch and dispose of emerging coolant.

Observe country-specific waste disposal regulations.

Necessary preliminary work: 

• Remove FRONT ACOUSTIC COVER 
• Drain COOLANT

Removal: 

Unlock and detach coolant hose (1).

Unlock and disconnect connector (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screws (1) and remove coolant pump (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Slacken nut (1).

Remount holder (3) from the coolant pump (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Position coolant pump (2).

Tighten down screws (1).

Tightening torque 11 51 6AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connector (2).

Lock and connect coolant line (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Attach FRONT ACOUSTIC COVER .
• Fill COOLING SYSTEM