Remove charge air line
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER .
- Refer to REMOVING DESIGN COVER .
- Refer to REMOVING INTAKE SILENCER HOUSING .
- Refer to REMOVING CLEAN AIR PIPE .
- Refer to REMOVING THE FRONT UNDERBODY PROTECTION .
- Refer to REMOVING BOTH COOLANT EXPANSION TANKS .
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
- Unlock plug connection (1) and disconnect.
- Unlock and loosen clamp (2).
- Unlock plug connection (3) and disconnect.
- Remove screws (arrows).
- Unlock and loosen the clamp (4) on the exhaust turbocharger.
- Guide out and remove charge air line (5).