Replacing the left LED technology headlight

Necessary preliminary work: 

• Remove FRONT BUMPER PANEL .

Removal: 

Unlock and remove cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connection (1) and disconnect.

Unfasten screws (2).

Release screw (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Remove headlight (2) forwards.

Courtesy of BMW OF NORTH AMERICA, INC.

US version:  Checking BLOCKING AT HORIZONTAL POSITION .

Remounting control units/modules: 

• Remount Front Light Electronics Control Unit. Refer to REPLACING FLEL CONTROL UNIT  or REPLACING LED MODULE FOR RIGHT DAYTIME DRIVING LIGHTS .
• Remount Led Module For Daytime Driving Lights. Refer to REPLACING THE LED MODULE FOR LEFT DAYTIME RIDING LIGHTS , REMOVING AND INSTALLING LED MODULE OF LEFT TURN INDICATOR  or REMOVING AND INSTALLING LED MODULE OF RIGHT TURN INDICATOR .
• Remount Led Module Direction-Indicator Light. Refer to REMOVING AND INSTALLING LED MODULE OF LEFT TURN INDICATOR  or REMOVING AND INSTALLING LED MODULE OF RIGHT TURN INDICATOR .

Installation: 

Thread in and position headlights (2).

Tighten screw (1).

Tightening torque 63 12 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten screws (2).

Tightening torque 63 12 1AZ .

Tighten screw (3).

Tightening torque 63 12 1AZ .

Connect and lock plug connection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Install cover (1) and lock against the direction of arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install FRONT BUMPER PANEL .
• ADJUST HEADLIGHT .
• US version: Checking BLOCKING AT HORIZONTAL POSITION .