Removing and installing left LED technology headlight

Necessary preliminary work: 

• Remove FRONT BUMPER PANEL .

Removal: 

Unlock and remove cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connection (1) and disconnect.

Unfasten screws (2).

Release screw (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Remove headlight (2) forwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Thread in and position headlights (2).

Tighten screw (1).

Tightening torque 63 12 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten screws (2).

Tightening torque 63 12 1AZ .

Tighten screw (3).

Tightening torque 63 12 1AZ .

Connect and lock plug connection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Install cover (1) and lock against the direction of arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install FRONT BUMPER PANEL .
• ADJUST HEADLIGHT .
• US version: CHECKING BLOCKING AT HORIZONTAL  position