31 51 065 Replacing O-ring for bearing block
WARNING: This page does not describe the selected car, but rather 41 other vehicles, including the 2018 BMW 320i xDrive, 2018 BMW 320i, 2017 BMW 320i xDrive, 2017 BMW 320i, and 2016 BMW ActiveHybrid 3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove BEARING SUPPORT .
Remove O-ring (1) with a suitable tool from bearing support (2).
Installation note:
Insert O-ring (1) in groove and coat with front axle differential oil.