41 0 0 Contents Of Body Repair General Information
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
General Information
Safety regulations
- SAFETY AT WORK
- Information on VEHICLE PROTECTION
- INFORMATION ON HAZARDS
Materials
- MATERIALS SCIENCE
- EXPENDABLE MATERIALS
- USE OF MATERIALS in outer skin
Handling components after an accident
- ELECTRICAL SYSTEM, electronics and optical fibre
Passive safety See 4100... HANDLING AIRBAGS AND RESTRAINT SYSTEMS or 7212... PROCEDURE AFTER AIRBAG TRIGGERING AS RESULT OF AN ACCIDENT
- CHASSIS, SUSPENSION AND STEERING
- FOLDING ROOF
- Vehicles with Hybrid drive
Body dimensions
Cavity sealing
- Installation of shaped parts See 4100... INSTALLING A CAVITY ACOUSTIC BAFFLE (EXPANDED) or 4100... INSTALLING A CAVITY ACOUSTIC BAFFLE (NOT EXPANDED)
- Position of shaped parts See 4100... POSITION OF SHAPED PARTS FOR CAVITY ACOUSTIC BAFFLE
Vehicle identification number
- VEHICLE IDENTIFICATION NUMBER, GENERAL
- Stamping vehicle identification number See 4100... STAMPING VEHICLE IDENTIFICATION NUMBER (NEEDLE STAMPING UNIT)
Repair techniques
- REPAIR STAGE 1 . All repairs that only provide for replacement of screwed/bolted components and planishing operations.
- REPAIR STAGE 2 . Repairs that are carried out by bonding and riveting without the use of a straightening bench.
- REPAIR STAGE 3 . Repairs that are carried out by bonding and riveting with the use of a straightening bench or welding.
Corrosion protection
Paintwork