51 64 010 Removing and installing/replacing left or right V-support

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove BUMPER TRIM

NOTE: Pictured without bumper trim carrier.

Release screws (1).

Remove V-support (2).

Tightening torque 51 11 2AZ .

Fig 1: Identifying V-Support And Screws

Courtesy of BMW OF NORTH AMERICA, INC.