33 32 681 Replacing one rubber mount in lower control arm (control arm removed)

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Attach special tool 33 3 354 between both control arms.

Press rubber mount with special tools 33 3 351 and 33 3 352 out of lower control arm.

Fig 1: Pressing Out Rubber Mount Using Special Tools (33 3 351 And 33 3 352)

Courtesy of BMW OF NORTH AMERICA, INC.

Attach special tool 33 3 354 between both control arms.

Press in new rubber mount (1) with special tools 33 3 351 and 33 3 353.

Fig 2: Pressing In Rubber Mount Using Special Tools (33 3 351 And 33 3 353)

Courtesy of BMW OF NORTH AMERICA, INC.

After installation

Perform CHASSIS ALIGNMENT CHECK