32 00... Moving vehicle into design position
WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to Technical Data
See REAR AXLE - RIDE HEIGHT E89
or FRONT AXLE - RIDE HEIGHT E89
).
Measure ride-level height of vehicle See 3353... MEASURING RIDE HEIGHT OF VEHICLE (REAR AXLE) or 3133095 MEASURE VEHICLE RIDE HEIGHT, FRONT AXLE