22 11 110 Replacing left engine support arm (N54)

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Secure engine in INSTALLATION POSITION
Remove REAR UNDERBODY PROTECTION and FRONT UNDERBODY PROTECTION .

Release grounding strap (1) from engine support arm.

Release screw (2).

Take off holder (3). Release screws (4).

Remove engine support arm.

Tightening torque 22 11 3AZ

Fig 1: Identifying Grounding Strap, Screw, Holder And Screws

Courtesy of BMW OF NORTH AMERICA, INC.