12 14 700 Coding control module (DME/DDE)

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Switch on ignition.

Connect MoDiC or DIS/GT1 Tester.

Select "Coding" program.

For subsequent procedure, follow

instructions in MoDiC or DIS/GT1 Tester. Carry out adjustment of following control units:

EWS (electronic immobilizer)
DME (Digital Motor Electronics)
or
DDE (Digital Diesel Electronics)

Refer to "Diagnosis and Coding" service information bulletins on subject of coding.