66 54 015 Replacing lens cover for night vision camera

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary work:

Completely remove NIGHT VISION CAMERA

Unlock latch mechanisms (1) and unfasten cover (2) in direction of arrow.

Fig 1: Turning Lens Cover

G06886565

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully remove sealing ring (1).

IMPORTANT: Adjoining surface of lens must not be damaged when sealing ring is removed!

Installation note:

Replace sealing ring.

Fig 2: Removing Sealing Ring

G06886566

Courtesy of BMW OF NORTH AMERICA, INC.

Thoroughly clean seal recess (1) using CLEANING AGENT R2 and cotton buds.

Fig 3: Identifying Seal Recess

G06886567

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

Adjust NIGHT VISION CAMERA
Fill up with washer fluid