66 54 001 Axially adjusting night vision camera
Vertical alignment can only be carried out with the BMW diagnosis system:
- Service functions:
-> Driver assistance systems
-> Night vision electronics
-> Calibration night vision electronics camera
Fold lid (1) in engine compartment lid gasket fixture mounting upwards as pictured.
Fold up engine compartment lid seal (1) as shown.
Front of vehicle must be parallel at distance (A) to headlight aiming device (1).
(A) = 2 m
Align a suitable straight object (2), e.g. a spirit level, horizontally on headlight aiming device.
Slowly carry out axial adjustment of night vision camera at adjusting screw (3).
If necessary, align the image of the night vision camera with aid of a second person.
Yellow help line (1) is displayed using diagnosis job.
Upper edge (2) must be aligned using adjusting screw parallel to yellow help line (1) in the CID.