Removing and installing/replacing cover for left or right capping in luggage compartment (X6 M)

Necessary preliminary tasks: 

• Remove RIGHT LUGGAGE COMPARTMENT WHEEL ARCH PANEL  or LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM .
• Remove D-PILLAR TRIM PANEL .

Removal: 

Release screws (1) and (2).

Feed out and remove shoulder cover (3) from edge protection along the dashed line (4).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Install shoulder cover (3).

Tighten screws (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install RIGHT LUGGAGE COMPARTMENT WHEEL ARCH PANEL  or LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM .
• Install TRIM PANEL FOR D-PILLAR .