51 24 050 Removing and installing/replacing lock element (lock cylinder) for rear lid

Necessary preliminary tasks:

Release screws (1).

Tightening torque 51 24 02AZ .

Fig 1: Identifying Lock Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Press counter-supports (1) at back to prevent accompanying rotation.

Fig 2: Pressing Counter-Supports

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip Bowden cable sleeve (1).

Feed out Bowden cable nipple in direction of arrow.

Fig 3: Feeding Out Bowden Cable Nipple

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure Bowden cable (1) is correctly positioned in rear lid.

Lay Bowden cable (1) without kinks.

Fig 4: Identifying Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Perform function check with rear lid open.