Removing and installing/replacing left headlight

Necessary preliminary work: 

• Remove FRONT BUMPER PANEL .

Unlock and remove cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connection (1) and disconnect.

Unfasten screws (2).

Tightening torque 63 12 1AZ .

Release screw (3).

Tightening torque 63 12 1AZ .

Release screw (1).

Tightening torque 63 12 1AZ .

Carefully remove headlight (2) in direction of arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Correctly install headlight (1) relative to holder (2).

ADJUST HEADLIGHT .

US version: CHECKING BLOCKING AT HORIZONTAL  position

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Rubber plugs (1) in engine compartment lid (2) must not be missing or damaged.

No cavity preservation may emerge from the rubber plugs (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

• If necessary, REMOUNT BULBS .
• Note BULB TYPE