Replacing halogen bulb for headlight on left
WARNING:
Follow instructions for handling light bulbs (EXTERIOR LIGHTS) .
Unlock and remove cover (1).
Turn protective cap (1) counterclockwise and remove.
IMPORTANT:
Risk of damage due to moisture penetration!
Installation note:
Check seal. Replace protective cap (1) if necessary.
Comply with INSTRUCTIONS FOR REPLACING THE PROTECTIVE CAP .
Protective cap (1) must lock correctly!
Turn the protective cap (1) clockwise to end stop (A)!
NOTE:
Similar to graphic.
Remove bulb holder (1) towards rear from headlight (2).
Installation note:
Make sure bulb holder (1) is correctly seated in headlight (2).
Detach bulb holder (1) from bulb (2).
Installation note:
Note BULB TYPE .
Recommendation:
Check HEADLIGHT ADJUSTMENT , correct if necessary.