61 31 172 Removing and installing/replacing switch for electromechanical parking brake
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- DISCONNECT NEGATIVE BATTERY CABLE (to avoid fault memory entries).
- F03 Only: Disconnect both battery negative cables.
- Remove GEAR SELECTOR SWITCH COVER .
Release screws (1).
Remove switch for electromechanical parking brake (2) from cover for gear selector switch (3).