22 11 110 Replacing left engine support arm (N54)

Necessary preliminary tasks: 

• Secure engine in INSTALLATION POSITION
• Remove underbody protection at front and rear. See REMOVING FRONT UNDERBODY PROTECTION and REMOVING REAR UNDERBODY PROTECTION .

Release grounding strap (1) from engine support arm.

Release screw (2).

Take off holder (3).

Release screws (4).

Remove engine support arm.

Tightening torque 22 11 3AZ

Fig 1: Identifying Engine Support Arm Grounding Strap And Screws

Courtesy of BMW OF NORTH AMERICA, INC.