Removing and installing/replacing vibration damper (S63T2) (X5 M)
Special tools required:
- 00 9 140
- 11 3 460
- 11 8 090
- 11 9 453
- 11 9 454
Necessary preliminary work:
- Remove FAN COWL .
- Remove the DRIVE BELT for the compressor of the air conditioning.
- Remove the BELT PULLEY of the air conditioning.
Release screw (1).
Tightening torque 11 28 1AZ .
Remove belt tensioner with deflecting element (2).
Secure special tool 11 8 090 with three screws (1) to vibration damper.
Secure special tool 11 8 090 with belt tensioner bolt (2) to timing case cover.
Tightening torque 11 28 1AZ .
NOTE:
A 3/4 inch tool is needed to release the central bolt.
Release central bolt on vibration damper.
Secure central bolt with special tool 00 9 140 or 11 3 460.
Position special tool 11 3 460 on special tool 11 8 090.
Adjust special tool 11 9 453 on special tool 11 9 454 using clamping screw to 0° on scale.
Tightening torque 11 23 1AZ .
Assemble engine.