51 24 100 Removing and installing/replacing rear lid lock

Necessary preliminary tasks:

Unlock plug connections (1) and disconnect.

Release screws.

Tightening torque 51 24 1AZ

Feed out rear lid lock.

Fig 1: Locating Rear Lid Lock Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip Bowden cable sleeve (1).

Feed out Bowden cable nipple in direction of arrow.

Fig 2: Removing Bowden Cable Sleeve

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Perform function check with rear lid open.