61 31 336 Removing and installing/replacing trim for gear selector switch

Necessary preliminary work: 

• Disconnect BATTERY EARTH LEAD 
• Remove both negative battery cables at F03
• Remove CENTER CONSOLE COVER

Release screws (1) and raise trim for gear selector switch (2) slightly.

Unlock and disconnect plug connection underneath for EMF switch.

Twist cover for gear selector switch (2) 90° and feed out upwards from the gear selector switch.

Fig 1: Identifying Gear Selector Switch And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Remount EMF SWITCH .