51 16 195 Removing and installing/replacing center armrest

Necessary preliminary tasks:

Release screws (2) on trim (1).

Remove trim (1) upwards.

Fig 1: Identifying Center Armrest Trim And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Automatic transmission models only:

NOTE: For purposes of clarity, illustration does not show gear selector lever.

Release screws (3).

Tightening torque 51 16 4AZ .

Release screws (2) on carrier housing (1).

Raise carrier housing (1) and disconnect plug connection.

Lay aside carrier housing (1) including gear selector switch.

Fig 2: Identifying Carrier Housing

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (2) from center armrest frame (1) and remove frame.

Replacement

Fig 3: Identifying Center Armrest Frame Screws

Courtesy of BMW OF NORTH AMERICA, INC.