66 53 060 Removing and installing/renewing the Top View camera

Necessary preliminary tasks: 

• Remove protective cap on exterior mirror  . See 51 16 041 REMOVING AND INSTALLING/REPLACING COVER CAP ON LEFT OR RIGHT EXTERIOR MIRROR , 51 16 041 REMOVING AND REFITTING/REPLACING PROTECTIVE CAP ON LEFT OR RIGHT EXTERIOR MIRROR (WITH SURROUND VIEW) (TO 07/13) or 51 16 041 REMOVING AND REFITTING/REPLACING PROTECTIVE CAP ON LEFT OR RIGHT EXTERIOR MIRROR (WITHOUT SURROUND VIEW) (TO 07/13) .

Unfasten plug connection (1) and disconnect.

Unfasten screws (2).

Remove exterior mirror camera.

Fig 1: Identifying Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Calibration: 

1. Calibration is performed via BMW diagnosis system:
   • Service function
   • Body
   • All-round vision camera
   • Calibration of all-round vision camera