51 16 150 Removing and installing (replacing) front storage compartment

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary work:

Unlock plug connection (1) and disconnect.

Unfasten screws (2).

Feed the storage compartment (3) out of the guides (4) and disconnect the plug connection from the power socket (5).

Installation note:

Make sure guides (4) are correctly seated.

Fig 1: Storage Compartment, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Guides (1) must not be damaged.

Replacement:

Modify charging socket (2)
Modify storage trays (3)
Modify AERIAL (4)

Fig 2: Charging Socket, Storage Trays And Guides
Courtesy of BMW OF NORTH AMERICA, INC.