51 45 195 Removing and installing/replacing instrument panel trim, bottom right

Unfasten screw connection (1).

NOTE: Version with knee airbag: Unscrew nuts (1).

Tightening torque: 51 45 9AZ .

Release trim panel (2) at clamps (3).

Feed out trim panel (2) in area (A) toward the bottom.

Lower trim panel (2) slightly and disconnect plug connections behind it.

Fig 1: Releasing Trim Panel Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Feed in trim panel (2) in area (A) correctly behind the center console.

Clamps (3) must not be damaged.

Installation note:

Guides (1) must not be damaged or missing.

Feed guides (1) correctly into the corresponding holders on the vehicle.

Replacement (depending on version):

Fig 2: Footwell Light And Guides

Courtesy of BMW OF NORTH AMERICA, INC.